Lanco Roof Coatings are an easy-to-use coating that allows for a more even seal between your roof and your shingled shingling.
They’re available in a variety of colors, and can be applied with any type of sprayer, including the old-fashioned broom and garden hose.
The sprayer will leave a fine, fine film of the coating on the shinglies that can be cleaned with a damp rag and wiped off with a clean cloth.
You can use the sprayer to spray the coating directly onto your roof.
However, if you need to spray it onto a shingly, it can be a bit tricky.
When applying it directly to a shingle, the spray will need to be directed towards the top of the shingle.
For shinglish roofs, you need the spray to be angled down so that it hits the roof as it passes over the shinkling.
This will help reduce any excess spray.
It can also be a hassle to apply it directly onto the roof.
To achieve a better seal, Lanco recommends using a foam board that has a bead of lacquer.
Apply the foam board directly to the roof with a brush.
Then, lay the roofing over the foamboard, covering the entire roof surface with the foam.
Then spray the roof and then wipe off any excess with a towel.
The foamboard should be positioned at a height that allows you to spray at least one inch from the bottom to the top.
Once the foam is completely dry, you can apply a coat of the coat on top of it.
The coat is meant to last for a year or so, and the spray can be easily wiped off.
If you have an older roof, Lancomo recommends that you spray the coat directly onto it and then sand down the shings with a sander.
This method can also leave a bit of the spray residue behind.